Project measuring tools

Quality is relatively ambiguous compared to other criteria. Regardless, it is a notable aspect of a product or project. Quality assurance is one of the most sought criteria in evaluating a project or product. A quality review should be done rigorously to avoid any unwanted problems from arising. As mentioned earlier, quality is ambiguous.

It is safe to say that it does not stand alone. There are many branches that could be related to project quality. Quality could be defined by the number of features matching the requirements.

That aside, it may also be evaluated by the constant improvement done on the said project. Besides the factors influencing the quality of the project, it is fundamental to jot down the cost of the quality of the mentioned project. Utilizing this formula helps companies to differentiate the costs used for good or poor-quality output. This will provide a clearer appraisal of the product and further improvisations to lower the costs could be addressed properly.

Doing this would be advantageous if your company strive to survive in the business world for a long time. During the planning stage of a product or project, one of the points that should be clearly written is the budget specified for the project. The budget could be one of the indicators in determining the success of a project. Success in delivering a project without exceeding the budget could be considered as one of the biggest accomplishments in any company. This includes direct and indirect costs, fixed and variable costs, manpower, resources, tools, and any other things that may influence the expenses of your project.

When measuring budget, always provide two different columns; planned and actual. This may effectively ease the comparison process. A clear and visible data presentation may avoid any unnecessary off-track expenditure which will negatively influence your project. This refers to how much the project contribute profits to the business.

The larger the margin measured, the higher the profit gained from the product. This is one of the most important formulas that ought to be applied by every business company. The formula will provide the difference between the planned budget with the actual costs used within a specific period.

If the cost is in negative form, it means that the project has exceeded the intended budget. Positive CV, on the contrary, means that you are on track. Last but not least, the most visible criteria to evaluate project success is customer satisfaction. Once the project has been conducted, you may want to ask for feedback from your clients or customer. Sometimes, while the production team successfully manages to produce a product as closely as possible to the initial plan, that does not mean that the product is what customers are looking for.

Even if your product seems perfect at a glance, there are still the risks of customers switching to other providers. Some may even stop using your service altogether. This could help in providing the best experience for the clients. It could ensure the longevity of dependence towards the said product, hence sustaining high demands from the clients. In most cases, this criterion is the most subjective indicator. It is quite difficult to be presented statistically. You may choose to gain feedback in the forms of rating from , or even gaining insights subjectively.

Deeper insights gained helps a lot in improving your project. Most of the time, the company resorts to building its customer satisfaction metric depending on the project they are working on. Determine the suitable variables that are highly related to the project. We look at delivery in comparison to the project plan Impact review with respect to quality of life Financial results against budget Your KPI for projects is practical and educative. Thanks for sharing what you measure, Alex, about projects.

Good to see the no1 KPI, Business impact, which should be the one and only reason the project is started. An agile methodology is measured differently then a waterfall style, although in the end, the Business Impact is for all the same end-goal. We sometimes forget that delivering the scope, on time and on budget is NOT what the ultimate goal is, and that there are multiple ways to get to Rome.

Order Practical Performance Measurement here. You are welcome to use articles from the Measure Up blog, with these requirements. Want more information?

Speak Your Mind Cancel reply Your email address will not be published. Bryan Sergeant says:. July 21, at pm. Stacey Barr says:. July 22, at am. Jens Bo Kristiansen says:. Martien Dingemans says:. July 22, at pm. Marty says:. Alex O Sackeyfio says:. Marco Nieuwenhuizen says:. July 26, at pm. Reprinting Articles You are welcome to use articles from the Measure Up blog, with these requirements. Professionally, they are mostly found in engineering and construction jobs, where they are used to ensure accurate measurements on flat surfaces.

A popular tool to have around the house, rulers are perhaps the most common measuring tool in use today. Available in a variety of specialized forms, you may also find:.

Combination squares, rulers with interchangeable angled heads that are used in woodworking and stonemasonry to mark out angled cuts. Drywall squares, extra-large versions of the standard measuring square that are designed to allow long, accurate markings for drywall cuts. Framing squares, also known as steel squares.

Widely used in carpentry to set up perfect right angles, the shorter side is known as the tongue while the longer side is known as the blade. Tape Measure. Also known as a measuring tape , these flexible rulers can be used to take measurements of size or distance.

Alternatively, the self-retracting metal tape measure utilizes a spring-loaded housing that can be clipped onto a belt. A ubiquitous tool of the construction trades, these tape measures are especially useful for taking measurements over long distances — sometimes up to feet! Faster, easier to use, and more accurate than an analog angle gauge, the digital angle gauge allows you to instantly find the angle of any surface you attach it to.

Equipped with a powerful magnetic base and automatic calibration controls, these measuring tools are especially useful in determining precise bevel and miter angles on powered saws. A self-leveling tool that emits a colored laser beam, the laser level allows for easy visual confirmation of both horizontal and vertical leveling. Some of the fancier models also include the capability of measuring the distance from the unit to the end of the laser beam, making them a fast and accurate solution for job site distance measurements.

Essential for use in high-precision machining, the micrometer resembles a caliper that screws down rather than sliding. Digital micrometers produce an instant readout on the distance between their two caliper heads, sometimes allowing for measurements accurate up to three or four decimal places.

One of the most widely recognized measuring tools, thermometers provide a reading for temperatures, with digital thermometers providing faster and more reliable results. They are a staple of modern medicine but also find their way into the culinary arts and environmental studies quite regularly. When comparing apples to apples, no two are exactly alike. Sweetness, tartness, texture, size, and color all play a role in the flavor profile.

Pete Ortiz Last updated: Jan 11 Analog Measuring Tools 1. Angle Locator Also known as an angle finder, each of these tools features a magnetic base that allows it to attach to metal measuring squares.