Hairline crack in acrylic bath

Process Pick up a bathtub repair kit from the hardware store or home improvement center. Clean the area around the crack in the tub. Sand the crack in the tub and a 1 inch radius all around the crack.

Cut a piece of mesh to fit over the crack, if necessary. Mix the epoxy and tinting materials as instructed in the kit. Its triple-layer adhesive effectively welds itself to nearly all types of surface, including PVC, metal, copper, steel, aluminum, acrylic, glass, cement and many others.

Affordable, attractive, and durable, fiberglass is nevertheless prone to cracking and pitting overtime. Fortunately, repairing a cracked or damaged tub or shower pan is a straightforward DIY job that most homeowners can do to save themselves money over an expensive replacement. Repairing cracked plastic can seem like a difficult task, but most common plastics are thermoplastic, which means they can be heated and remolded.

Smaller cracks can usually be fixed with glue, hot water, or plastic slurry, while larger cracks may require some welding with a soldering iron.

Can you resurface a plastic bath? A — Yes. Most of the baths we resurface are cast iron or metal baths but we can resurface acrylic and plastic baths as well as pressed steel and cast iron- to any colour. Often we resurface a plastic bath due the costs that would be incurred replacing the bath. If you have a young child that always bangs their toys along your tub, you could see hairline cracks from this.

Constant or recurring damage will lead to small cracks that will turn into big cracks. Cracks are common in bathtubs, so there are easily accessible options to fix them. While you can go to your local hardware store and pick up a kit, they are not as high quality and long-lasting as having a professional do the work for you.

While it will be more expensive to hire a pro to fix your tub, the results are worth it. The good news is that by having a pro there, they can handle your current issue as well as discuss maintenance tips and provide future project advice.

The biggest benefit of hiring a pro to help you with this issue is the peace of mind knowing the job has been done right. Instead, with proper maintenance and care, you can ensure there are fewer and less severe cracks in your tub.

This is the biggest thing to ensure you have a bathtub that lasts. Also, avoid using cleaners with heavy abrasion as this will damage the finish on your tub and weaken it. Last but not least, remember to be gentle with your tub.

Do not throw items around or smash them down. If you have any concerns about your bathtub, you can always reach out to a plumber.

Whether you have questions about the support and material of your tub, or you want a solution for your cracks, they will be happy to help.

Remember to be kind to your tub so you can keep relaxing in it for years to come. When not busy browsing Pinterest, Jessica can be found wandering through vintage shops and baking desserts with varying degrees of success.

Common Causes of Bathtub Cracks Cracks can form in your bathtub when heavy items are repeatedly dropped onto it. Types of Bathtub Cracks There are two main types of cracks that could occur in your bathtub: Stress Cracks Stress cracks form when a heavy object is dropped onto the surface of your tub. Make sure there are no sediments left on it after the cleaning. Afterward, rinse it with water then dry it with a dry piece of cloth. Take a piece of the sandpaper then slowly sand the area surrounding the crack.

With a soft brush, brush away the dust to leave a clean but slightly rough area. Using a soft brush like the one found in the fiberglass repair kit, paint the area with the crack and an inch around it as well. Apply as much adhesive as possible without using too much of it then let it dry as per the instructions of the repair kit.

Get hold of a putty knife and fill the crack with your fiberglass filler. After that, remove the excess putty by scraping the surface of your tub. Ensure that, even with the putty, the repair area is still flush with the rest of the surface of your bathtub.

Let the putty dry as directed by the repair kit instructions. Using the fine-grit sandpaper, sand away any excess material from the surface of the crack to ensure the crack and the rest of the surface are flush with each other. Brush away the dust from the crack area. With the instructions from the repair kit, mix the epoxy gel coat to a good consistency then use a paintbrush to apply it to the cracked area.

Ensure the gel covers the whole crack and an inch around it as well. Before the epoxy gel drys up, cut a piece of fiberglass cloth the size of the area to be covered and place it on the crack using your hand. To eliminate any air bubbles below this cloth, use your putty knife by running it across the cloth. Ensure the cloth is also flush with the rest of the bathtub surface. As the last stage, apply a coat of sealer to the area of the crack and wait for it to dry.